How To Connect NVR To Wifi Router Without Cable? – Easy 3 Steps

router without cable

Generally, it is not, but if you have bought a new NVR, connecting it to the wifi router without cable may be challenging. Once you know the process, it will be simple for you. But the question is how to connect NVR to wifi router without cable?

Connect the adapter to the monitor and set settings to enable the Wi-Fi connection. After that, check the P2P information and enable it to change its status. Make sure Wifi and P2P have connected status.

Once you read the detailed instructions below, you can do this job in a couple of minutes. Stay here to learn the simple techniques for connecting nvr to wifi router without cable.

Can you connect NVR to the router without a cable?

Yes, it is possible to connect NVR to the router without wires. But this is only possible when your router supports any one of the following settings.

  • You have the option of entering manual details into the NVR
  • If your router supports entry of details busing WPS setup

router without wires

How do I connect NVR to the wifi router (Without cable)?

Does your router support any of the above settings? Now follow the step-by-step instructions below to connect NVR to the wifi router without cable.

Things you will need:

  • NVR
  • Wifi- Router

3 Step-by-step guide to connecting NVR to Wifi- router

Step 1 – Connect the adapter to monitor

First, connect the adapter to the monitor. Plug the USB end of the adapter into the USB charging port of the monitor or projector.

Connect the adapter to monitor

Step 2 – Enable the Wifi

  • Once the adapter is connected to the monitor, right-click and then go to the main menu
  • Then you will see the display below on the monitor, go to Network and then click on IP Address.
  • After clicking on the IP Address, you will see the details of the IP address on the monitor screen.
  • Click on Wifi from the above menus; you will see the following display on the screen.
  • Then click on the Wifi “Enable” and “DHCP” Options and then click on “Apply” in the right corner.
  • Next, search on “Search” and check the Status; you will see the status “Not Connected.”
  • Then select “CCTV” from the above SSID options. You will see “CCTV” in SSID.
  • Then enter the password and then click on “Apply.”
  • Once you have clicked “Apply,” it will take a few seconds to change its status from “Not connected” to “Connected.”

Step 3 – Check the P2P connection.

  • Once Wifi is connected, do not forget to check the P2P connection. It may be in disabled status. Click on Transfer mode to access the P2P display bar.
  • Look at the above picture, it is showing enable, but the status is connection failed. To connect it, first uncheck the “ Enable” it will be disabled after you press the “Apply” button.
  • Then mark “Enable” and then “Apply” and wait for a few seconds.
  • After a couple of seconds, look again, and the status will be “Connected.”

Once you see it is connected, you have successfully connected the NVR to the wifi router, and it is ready for proper working.

How can you extend your NVR Wifi range?

For extending the NVR wifi range, follow the below simple steps

  • Connect the NVR with the IP camera by using an Ethernet cable
  • Switch on the NVR and IP Camera
  • The go-to “Video Manage” menu on the NVR
  • For scanning the IP Camera, click on the “Refresh” button
  • Once the IP camera is detected, then press “Match Code” to save it to NVR
  • Also, follow the same process for all other cameras; you will see the extension in range.

How does Wireless NVR work?

The NVR system has three major parts: the NVR, a network, and the cameras.

  • Cameras in the NVR system work for displaying video or images; NVR is used in combination with IP Cameras.
  • NVR is the major device in this system that contains hard drives or other cloud storage technologies. They receive and store the data for viewing later. You can connect multiple cameras with NV.
  • A network is required to connect the NVR with IP cameras. It is possible to connect it through wires or wireless.

Cameras in the NVR system

Connection Failed Solutions

If you are having trouble connecting your Network Video Recorder (NVR) to your WiFi router, there may be a solution. Oftentimes, the problem can be solved by simply connecting the NVR directly to the WiFi router using an Ethernet cable. If this does not work, it may be necessary to purchase an adapter that will allow the NVR to connect to the WiFi network.

If you are still having trouble connecting your network video recorder (NVR) to your home wifi router without a cable, there may be some things you can do to troubleshoot the issue.

First, make sure that you have the correct cables plugged into both devices. If you are using an Ethernet cable to connect your NVR to your router, make sure that it is plugged into the WAN port on the NVR and not the LAN port.

Next, check to see if there is any obstruction between the NVR and the wifi router. If there is something blocking the signal between them, it may be difficult for them to connect. You can try moving any furniture or appliances between the two devices until they can connect properly.

If all of these solutions fail to help you connect your NVR to your wifi router, it may be necessary to reconfigure your router settings. This can be done by following our guide on how to reconfigure a wireless router.


NVR connected to the router

1. Does an NVR have to be connected to the router?

NVRs can be connected to routers for centralized management and security, but they don’t always have to be. Many NVRs come with their own built-in management capabilities that allow them to communicate directly with router devices.

In some cases, the NVR can even act as a router itself, routing traffic between devices on your network. If you only need to connect the NVR to a router for remote access or basic network administration, you can do so without any additional hardware.

However, if you want to use features like motion detection or recording, you’ll need to connect the NVR and router together using an appropriate network cable.

2. How do I connect to NVR wirelessly?

If you’re looking to connect your NVR to the internet wirelessly, there are a few different ways to do it. The easiest way is to use a wireless network adapter and connect your computer directly to your NVR.

This will work fine if you have a fairly modern computer with 802.11n or 802.11ac wireless built-in, but if not you can purchase an external wireless adapter. Another option is to use an IP camera as a Wi-Fi extender.

3. How do I connect my NVR to the internet without a router?

There are a few ways to connect an NVR (network video recorder) to the internet without a router. The easiest way is to use an Ethernet cable. You can also use Wi-Fi or a wireless network connection. If you want to use a wired connection, you can use a USB adapter or an Ethernet cable connected directly to your computer.

Final Verdict

NVR system connects with IP security cameras to store the images or videos for later viewing. You have the option to connect it with a router through wires or wirelessly. We have provided you with complete details about connecting NVR to wifi router without cable.

Who We Are

At Kingston College, we are your dedicated guides to a world of learning, innovation, and personal growth. With a passion for knowledge and a commitment to your success, we bring you diverse content, expert insights, and practical guidance in every category we offer.

kingston who we are