PS4 Controller Won’t Charge – Power Up Your Game with 10 Easy Fixes

You can use your DualShock 4 controller wirelessly or via USB. However, your PS4 controller won’t charge, making it impossible to use the peripheral without cords.

There could be several reasons why your PS4 controller isn’t charging. There could be small physical problems, such as dust or cable damage. There could also be a software issue that requires you to reset and update the console.

Yet, because it is a widespread problem, there are common remedies.

Possible Reasons

There are several possible causes for your PS4 controller not charging.

In essence, you’re dealing with either physical or software issues. Here’s a basic rundown of the problems:

  • PS4 Issues: Unexpected flaws in your system may prohibit you from charging the controller. You can resolve this by power cycling the console, resetting the controller, and updating the console.
  • Damaged USB Port: If your USB port is not working, simply try another one.
  • Cable problems: The micro USB cord may be worn out or broken. Similarly, the cable may be faulty, as wires deteriorate over time. Also, certain third-party cables are not intended for charging.

Finally, either the battery or the charging port may fail. Fortunately, replacing is simple.

How to Fix PS4 Controller Won’t Charge?

It should charge when you attach your PS4 controller to the console through a charging cord. But, you may notice that the lights on the front of the controller are not turning on. This indicates that the PS4 controller is not charging.

If this is the case, try each of our remedies one at a time until you find one that works for you.

1. The Controller should be reset

PS4 white controller

In most cases, a random problem disrupts the connection between the PS4 and the controller. The first solution is to reset your peripherals.

  1. Switch off your PlayStation 4.
  2. Disconnect your game controller.
  3. Disconnect your PlayStation 4 from the wall.
  4. On the back, look for the reset button. It’s a little button just below the L2.
  5. Push the button inside with a small instrument, such as a pin. Keep the reset button pressed for
  6. At least 5 seconds.
  7. Attach the PS4 controller to the console using the USB cord.
  8. Connect the PS4
  9. Push and hold the PS button.

If the front light bar becomes blue at this moment, the remedy is effective.

2. Reconnect the Controller

Re-pairing the controller is the next option.

  1. Start the PS4
  2. Go to Settings.
  3. Go to Devices.
  4. “Remove all devices from the list” should be selected.
  5. Switch off the console.
  6. Reset the controller by pressing the reset button for five seconds with a bobby pin.
  7. Turn on the console and plug the USB wire into the controller.
  8. On the controller, press the PS button.
  9. You can remove the cable and use it wirelessly again after the controller light turns on.

After that, see whether the controller can charge.

3. Restart the Console

ps4 console

The third alternative is to perform a complete power cycle on your PS4. It frequently aids in the removal of random bugs.

  • Turn the PS4 and the controller off.
  • Remove the PS4’s power cord.
  • Wait 30 minutes.
  • Hold down the power button for 30 seconds while the console is turned off and unplugged to drain any remaining energy.
  • Reconnect the PS4
  • Switch it on.

You should be able to tell if this has resolved the issue by now.

4. Update and Reset

Let us combine the following solutions for a more complete approach:

  1. Start the PS4
  2. Go to Settings, then Devices.
  3. Choose “Switch off gadget.” It will take you to a screen where you may choose to turn off “All” devices or just one.
  4. Choose All
  5. Manually turn off the console (with the power button)
  6. Disconnect the console for 30 minutes before pressing the power button for 30 seconds.
  7. The controller should be reset.
  8. Connect the controller via USB.
  9. Start the PS4
  10. Go to Settings.
  11. Choose System Software Update.
  12. Choose the “Update Now” option if it appears.
  13. When the update has finished downloading, click Accept.
  14. Allow the program to conclude.

Try charging the controller again once you’ve updated the console.

Remember that, unlike the Xbox controller, you do not need to upgrade the PS4 controller’s firmware.

5. Modify the USB Port

The USB port on your PS4 may occasionally stop working. To confirm that this is the issue, try charging the PS4 on other devices, such as your PC.

If it’s not charging from any source, the issue is with the controller, so move on to the next solutions.

6. Replace the Cable

change cable

You may want to replace your PS4 cord before changing the battery. Try an alternative cable, and make sure the one you’re using isn’t damaged.

7. Charge the Controller Backwards

It sounds strange, but it works. You can charge the PS4 controller by turning it upside down.

This is beneficial since it can clean the dust from the charging port.

8. Replace the Batteries

change ps4 controller battery

Although changing the battery on your controller is not as simple as it should be, you can do it yourself. If you don’t have a small crosshead screwdriver or a Phillips head screwdriver, you could take it to a service center instead. A pry plastic bar and the correct PS4 battery are also required.

The steps are as follows:

  • Unscrew all of the screws on the back of the DualShock 4 using the screwdriver. Store the screws in a safe place.
  • With a plastic pry bar, pry open the case. Move the bar around the controller until the case appears.
  • The case is held together by a ribbon cable. When opening the controller, use caution.
  • Remove the battery connector. Pull it out by twisting and turning it.
  • Replace the battery in the controller. Ascertain that the connector’s ledge is at the bottom. Connect the connector pin to the socket.

While the procedure is simple, you must use extreme caution and delicacy. While you’re at it, use a microfiber cloth to remove any dust.

9. Ensure that the charging port is clean

controller port

The charging port could be clogged with dust or grit. It would prohibit the charging of your PS4 controller.

To clean the area, use compressed air, a microfiber cloth, a wooden toothpick, an electric blower, or a cue tip. Then try once more.

10. Alter the Charging Port

PS4 CONTROLLER repair

Like before, a Phillips Head screwdriver or a small crosshair screwdriver is required. You’ll also need a plastic pry.

  • Remove the four screws from the back.
  • To remove the casing, use the plastic pry. Take care when using the plastic ribbon cable.
  • Remove the plastic ribbons that attach the cases.
  • Take a look at the top of the case.
  • Pull the light bar out by pulling it out.
  • Remove the two pieces of plastic that cover the charging port.
  • Unscrew the two screws that hold the charging port in place.
  • Gently lift the port from its base
  • Put the new port in. Ensure it’s facing the proper direction. Simply slot it into place
  • Return the ribbon cables to their original positions.
  • Return the two screws to their original positions.
  • Replace the plastic cover and reinstall the light bar in its socket.
  • Reassemble the controller. Make certain that the ribbon cable is returned to its proper location.
  • Replace the four screws.

FAQ

How do I repair a faulty charging port on my PlayStation 4 controller?

You can repair it by pushing the charging port back into place with a toothpick or a small object.

How can I repair a faulty charging cord for my PlayStation 4 controller?

You can repair it by either replacing it with a new cable or repairing the broken components of the old one.

Is it possible to charge my PS4 controller while playing games?

Absolutely, by connecting it to a power source, you may charge it while playing games.

How can I repair a PlayStation 4 controller that won’t charge or turn on?

You may solve it by resetting it, inspecting the charging cable and port, and, if necessary, replacing the battery.

How long does it take to charge a PS4 controller completely?

It takes roughly 2-3 hours to charge completely.

Why is my PS4 controller taking so long to charge?

It could be charging slowly owing to a low power output from the charging source or a damaged charging cord.

How can I tell if my PS4 controller is fully charged?

When completely charged, the controller’s light bar will cease flickering and become a solid color.

Is it possible to charge my PS4 controller with a laptop or computer?

Sure, you may charge it using a laptop or PC as long as it fits the controller’s power needs.

Conclusion

Finally, a non-charging PS4 controller might be a source of frustration for gamers. But, there are a few simple remedies that can be explored before purchasing a new controller.

There are several solutions to attempt, such as resetting the controller, cleaning the charging port, or replacing the charging cord.

By following the ten procedures explained in this article, players can re-charge their controllers and return to their favorite games.

It’s crucial to realize that while some of these remedies may work for some, they may not work for others, and in certain circumstances, expert assistance or replacement of the controller may be required.